EUREP

Digital instructions in the EU: when paper is still required

Stefan Hülsiggensen

10 min read

Digital instructions in the EU: what may go online under the GPSR, CE law and the Machinery Regulation, what stays on paper, what Omnibus IV would change.

Instruction manual with safety pictograms next to a cordless drill on a workbench

You make cordless garden tools in Taiwan or smart speakers in the U.S. and want to replace the printed manual with a QR code. Whether digital instructions are enough in the EU depends on the law that covers your product: machinery may switch under conditions, other CE products partly, consumer products covered only by the General Product Safety Regulation (GPSR) not at all. Here is what may be digital today, what changes with the Machinery Regulation and the planned Omnibus IV package, and how to set up a QR code manual that holds up.

Instructions and safety information: two parts, two rules

Most EU product laws require a product to be accompanied by instructions and safety information in the language each member state sets, but many do not say on what medium. Increasingly, the instructions for use may be digital, while safety information for consumer use stays on paper or on the product.

For CE products, the sector act governs the instructions, not Articles 9 to 18 of the General Product Safety Regulation (EU) 2023/988 (opens in a new tab) (Article 2(1)). Its rules on online offers and digital information (Articles 19 and 21) still apply.

What may be digital today, law by law

Digital instructions and what stays on paper, by legislation (as of 5 October 2026)
Product and legislationDigital instructionsOn paper or on the product
Consumer products under the GPSR onlyOnly in addition (Art. 21)Instructions and safety information (Art. 9(7), 11(4))
Electrical and radio equipment: Directives 2014/35/EU, 2014/30/EU, 2014/53/EUThe rest of the instructions, per Commission guidanceSafety information; a free paper copy for consumers who ask
Machinery until 19 January 2027: Directive 2006/42/ECConsidered compliant under the Regulation's conditions (Commission guide, §255)Essential safety information for non-professional use
Machinery from 20 January 2027: Regulation (EU) 2023/1230Allowed under Art. 10(7)Essential safety information for non-professional use; full instructions on request at purchase
Digital instructions and what stays on paper, by legislation (as of 5 October 2026)

Consumer products without CE legislation: the product must be accompanied by clear instructions and safety information unless it can be used safely without them (Article 9(7) GPSR; for importers, Article 11(4)). Article 21 allows a digital version, for example via QR code (Recital 32), only in addition. For their content, see clear instructions under the GPSR and GPSR safety warnings.

Electrical and radio equipment: the Low Voltage Directive (opens in a new tab) (LVD, Article 6(7)), the Electromagnetic Compatibility (EMC) Directive (opens in a new tab) (Article 7(7)) and the Radio Equipment Directive (opens in a new tab) (RED, Article 10(8)) only say “accompanied by”. The Commission's Blue Guide (opens in a new tab) reads this as: safety information on paper, the rest electronic or on a website for a reasonable period, and a free paper version for consumers who ask (section 3.1, footnote 114). This is guidance, not law.

Machinery until 19 January 2027: the Machinery Directive 2006/42/EC requires instructions to accompany the machine (Annex I, section 1.7.4). The Commission's guide to the Directive (opens in a new tab) (edition 2.3, April 2024) considers digital instructions that meet the Regulation's conditions compliant as well (§255).

Digital instructions under the Machinery Regulation

Regulation (EU) 2023/1230 (opens in a new tab) applies from 20 January 2027 (Article 54, as corrected (opens in a new tab)). Article 10(7) allows instructions for use in digital format if you:

  • mark on the machine, or where that is not possible on the packaging or an accompanying document, how to access them;
  • let users print, download and save them, also where they are embedded in the machine's software;
  • keep them online for the expected lifetime of the machine and at least 10 years after placing on the market.

Two paper duties remain. Any user, not only a consumer, may ask for paper instructions at the time of purchase, and you supply them free of charge within one month. For machinery that non-professionals can foreseeably use, the essential safety information is always on paper.

Maintenance instructions for specialized personnel mandated by you or your Authorized Representative may be in one official EU language they understand (Annex III, Part B, section 1.7.4). Importers ensure that the instructions come with the machine, and distributors also check their language (Articles 13(4) and 15(2)(c)). More in our Machinery Regulation 2027 checklist.

Omnibus IV: what would change for electrical and radio equipment

With Omnibus IV, the Commission proposed in May 2025 to digitalize product documentation under CE directives (COM(2025) 503 (opens in a new tab)) and regulations (COM(2025) 504 (opens in a new tab)). Negotiators of Parliament and Council agreed on 9 June 2026; the Council's ambassadors confirmed the texts on 26 June 2026 (Council document 10980/26 (opens in a new tab)).

When we checked on 5 October 2026, Parliament's internal market committee had approved the agreed texts (14 July 2026), and the plenary vote was indicatively set for 23 November 2026 (2025/0133(COD) (opens in a new tab), 2025/0134(COD) (opens in a new tab)). After that vote, the Council must still adopt them before publication in the Official Journal. The agreed directive text (opens in a new tab) brings a model close to the Machinery Regulation to low voltage and radio equipment:

Machinery Regulation compared with the agreed Omnibus IV text for low voltage and radio equipment
PointMachinery Regulation, from 20 January 2027LVD and RED, agreed Omnibus IV text
Safety information on paperFor machinery that non-professionals may useFor equipment consumers may use; under the LVD, marking on the product instead
What you markHow to access the digital instructionsHow to access them and how to request paper
Paper on requestAt the time of purchase, free, within one monthAt purchase or up to 24 months later, free, within one month
Notice of the right to paperNot required by Article 10(7)Must be stated in the safety information
Machinery Regulation compared with the agreed Omnibus IV text for low voltage and radio equipment

Both texts keep digital instructions online for the expected lifetime and at least 10 years; the EMC Directive would get the same model for its Article 18 precautions. The EU Declaration of Conformity would become electronic, but Article 10(7) of the Machinery Regulation stays as it is. Where another EU act requires the declaration or instructions in a digital product passport, digital machinery instructions would go only there (new Article 21(5)); see digital product passport requirements.

How to set up digital instructions as a manufacturer outside the EU

  1. Classify each product. Which act governs its instructions, and can consumers or non-professionals foreseeably use it? This decides what stays on paper.
  2. Split the content. A printed safety leaflet travels with the product in every target language; the full manual goes online where the law allows.
  3. Mark the access. A QR code and short web address on the product (where impossible, on the packaging), plus one line on how to request paper.
  4. Choose languages per market. Digital instructions follow the same language rules as paper (Article 21 GPSR, Article 10(7) Machinery Regulation); see GPSR language requirements.
  5. Version and host the manual yourself. Each version must match the product it ships with; keep superseded versions online, for machinery at least 10 years. Use a domain you control, with no login or app.
  6. Run a paper-on-request process. Free of charge within one month, for example via an EU print partner; tell distributors how customers get copies.

Example: a Canadian maker of log splitters

A Canadian company sells an electric log splitter to EU consumers and a heavier model to forestry contractors, both placed on the market from February 2027.

Consumer model: a printed leaflet with the essential safety information in its markets' languages, including how to order the paper manual, and a QR code on the machine to the manual for model LS20, revision B.

Professional model: digital instructions only, because non-professional use is not reasonably foreseeable. A contractor who asks at purchase still gets the paper manual free of charge within one month.

Common mistakes with digital instructions

  • A QR code instead of a manual for a GPSR product. Digital information only adds to what accompanies the product (Article 21 GPSR).
  • Overwriting the online manual. Instructions must describe the model they belong to (Article 10(7) Machinery Regulation), so older units need their version.
  • Offering paper only to consumers. Under the Machinery Regulation, any user may ask for it at the time of purchase.
  • Forgetting the online offer. Warnings and safety information must also appear in every online listing, CE products included (Article 19(d) GPSR).

Conclusion: digital where the law allows, paper where users need it

Digital instructions are becoming normal for machinery and, if Omnibus IV is adopted as agreed, for low voltage, EMC and radio equipment. Consumer safety information stays on paper or on the product, and GPSR products keep the printed manual.

The content of your instructions remains your responsibility as manufacturer. Our Labels, Manuals & Product Information service checks manuals and safety information by market; for CE products, see also our CE marking service. For labels, see GPSR label examples.

Frequently asked questions

Can I replace the paper manual with a QR code in the EU?

It depends on the law. From 20 January 2027, machinery may come with digital instructions under Article 10(7) of Regulation (EU) 2023/1230, with essential safety information on paper where non-professionals may use it. Consumer products under the GPSR need instructions that accompany the product; a QR code may only add to them (Article 21 GPSR).

Do I have to send a paper manual if a customer asks for one?

For machinery, yes: if a user asks at the time of purchase, you provide paper instructions free of charge within one month (Article 10(7) Machinery Regulation). For low voltage, EMC and radio equipment, the Commission's Blue Guide expects a free paper version for consumers who ask; Omnibus IV would allow requests up to 24 months after purchase.

How long must digital instructions stay online?

Under the Machinery Regulation, for the expected lifetime of the machine and at least 10 years after it was placed on the market (Article 10(7)(c)). The Omnibus IV texts agreed for low voltage, EMC and radio equipment use the same period.

Does Omnibus IV allow digital-only instructions for consumer products?

No. Omnibus IV amends CE legislation, not the GPSR. For low voltage, EMC and radio equipment that consumers may use, the agreed texts keep the safety information on paper or, under the LVD and EMC Directive, marked on the product. As of 5 October 2026, the texts had not been adopted.

In which language must digital instructions be?

In the same language as printed ones: a language easily understood by users, as set by the member state where the product is sold (Article 21 GPSR; Article 10(7) Machinery Regulation). A link to an English-only manual is not enough where a country requires its own language.

More insights

Apply this to your product

Talk to our team: we identify which of these requirements apply to you.

Stefan HülsiggensenFounder and Managing Director