EUREP

EU product launch checklist: what each team must deliver

Stefan Hülsiggensen

10 min read

EU product launch checklist by team: what development, quality, marketing and regulatory must deliver before launch, and who decides it is market ready.

Hand placing a blank sticky note in a grid of notes on a grey wall

Your engineers say the product is finished, sales has an EU distributor lined up and marketing has the listing ready. Each calls it market ready and means something different. EU law sets a narrower test: certain documents, roles and product information must exist before the first unit is placed on the market. This EU product launch checklist sorts them by team and shows who makes the final call.

What market ready means under EU product law

A product is placed on the market when it is first supplied for distribution, consumption or use on the EU market in the course of a commercial activity (Article 3(6), (7) of the General Product Safety Regulation (EU) 2023/988 (opens in a new tab), GPSR). These conditions must be met before that moment:

  • Risk analysis and technical documentation exist (Article 9(2) GPSR). For CE-marked products, the conformity assessment and the EU Declaration of Conformity are done and the CE marking is affixed (Articles R2(2) and R12(2) in Annex I to Decision No 768/2008/EC (opens in a new tab), repeated in CE acts such as Articles 6 and 17 of the Low Voltage Directive 2014/35/EU (opens in a new tab)).
  • An economic operator established in the EU is responsible for the product (Article 16(1) GPSR; for most CE-marked products, Article 4(1) of Regulation (EU) 2019/1020 (opens in a new tab)).
  • From the day it goes live, every online offer names the manufacturer and the EU responsible person, identifies the product and shows its warnings (Article 19 GPSR).

For products it covers in full, the GPSR also requires internal processes for product safety (Article 14). In our work with manufacturers outside the EU, we often see each team define ready its own way: tests passed, distributor signed, listing approved. None of these alone meets the legal test.

Development: the safe design and the evidence for it

Development turns requirements into a product and documents how:

  1. A safe design: the general safety requirement (Article 5 GPSR), assessed against the aspects in Article 6(1), from interaction with other products to cybersecurity, or the essential requirements of the sector act (Article R2(1)).
  2. Risk analysis and technical documentation, including, where relevant, the European standards applied in full or in part (Article 9(2) GPSR); for CE-marked products, the conformity assessment, with a notified body where the act requires one (Article R2(2)).
  3. Room for the markings: type, batch or serial number and the manufacturer's name, postal and electronic address on the product, or on the packaging or an accompanying document where that is not possible (Article 9(5), (6) GPSR).
  4. Content for instructions and safety information, written for the average user, not only for the intended use (Blue Guide 2022 (opens in a new tab), section 3.1).

Details: GPSR risk assessment, technical documentation and whether your product needs CE marking.

Quality: every unit like the one you tested

A test report covers samples; the law covers every unit placed on the market:

  1. Series production control that keeps production in conformity (Article 9(4) GPSR) and, for CE-marked products, takes changes in design or standards into account (Article R2(4)).
  2. Control over contract factories: when you subcontract, you keep overall control and must receive all the information you need (Blue Guide 2022, section 3.1). Put change notifications and test data access in the supply contract.
  3. Marking checks at final inspection against the approved artwork.
  4. A complaints channel and register working from launch day (Article 9(11), (12) GPSR); for CE-marked products, sample testing and a register where the risks justify them (Article R2(4)).

Marketing and sales: claims, listings and channels

Marketing and sales decide who uses the product and how it reaches them:

  1. Target users and presentation: the safety assessment covers presentation and labeling, the consumers who use the product, especially children and older people, and an appearance that invites other uses (Article 6(1)(d) to (f) GPSR). A professional tool also promoted to home users is likely to be used by consumers and falls under the GPSR (Article 3(1); see GPSR and B2B products).
  2. Instructions and warnings in the language each member state sets (Article 9(7) GPSR; see language requirements).
  3. Complete online offers in your shop and on every marketplace: manufacturer, EU responsible person, picture, type and identifier, warnings (Article 19 GPSR).
  4. Channels and customer records: selling to an EU importer or directly to consumers decides who can be your EU economic operator (Article 4(2) of Regulation (EU) 2019/1020). Record which businesses you supply: six years for GPSR products (Article 15(3), (5) GPSR), 10 years for CE-marked products (for example Article 11 of Directive 2014/35/EU).

What EU retailers ask for is in GPSR distributor obligations; routes for U.S. companies are in our guide for U.S. manufacturers.

Regulatory: rules, roles and declarations

Regulatory, often one person or an external partner, defines the requirements first and confirms the evidence last:

  1. The applicable rules: GPSR only, or which CE acts and harmonized standards (Article 2(1) GPSR). Development designs to them, so they come first.
  2. Declaration of Conformity and CE marking for CE-marked products, once the conformity assessment has shown compliance (Article R2(2)); see who signs the declaration.
  3. Your EU economic operator, in place before your first offer or shipment: usually an importer or an Authorized Representative with a written mandate (Article 16(1) GPSR; Article 4(1), (2) of Regulation (EU) 2019/1020). Its contact details go on the product, packaging, parcel or an accompanying document (Article 16(3) GPSR; Article 4(4)).
  4. Access to the file for 10 years (Article 9(3) GPSR; Article 6(3) of Directive 2014/35/EU) and a route for answering an authority's reasoned request (Article 4(3)(b) of Regulation (EU) 2019/1020; see authority requests).

The full duty lists are in our GPSR compliance checklist and, market by market, in the EU and UK market entry checklist.

Who decides that the product is market ready

The manufacturer. The GPSR assigns the safe design and the technical documentation to the manufacturer (Article 9(1), (2)); most CE acts keep both out of an authorized representative's mandate (Article R3(1); Article 7(1) of Directive 2014/35/EU; see Authorized Representative mandate). The Commission's Blue Guide adds that the manufacturer keeps ultimate responsibility for conformity and can never discharge it to an authorized representative, distributor or subcontractor (section 3.1). For CE-marked products, it assumes that responsibility by drawing up the Declaration of Conformity (Article R10(3); Article 15(4) of Directive 2014/35/EU).

Your EU economic operator verifies that the declaration and the technical documentation have been drawn up (Article 4(3)(a) of Regulation (EU) 2019/1020) and, for GPSR products, regularly checks where the risks make it appropriate that the product matches the file, its markings and instructions (Article 16(2) GPSR). An importer must also hold back a product it believes does not comply (Article 11(2) GPSR; Article R4(2)). Their checks feed your sign-off but do not replace it.

Your EU product launch checklist as one sign-off sheet

Our recommendation: one release owner who can stop a launch, and a release per product model and market, because languages and channels differ. One sheet collects the evidence:

Sign-off before placing a product on the EU market: owner, evidence and legal basis
Launch gateOwnerEvidenceLegal basis
Applicable rulesRegulatoryList of acts and standardsArt. 2(1) GPSR
Risk analysis, technical documentationDevelopmentFile with test reportsArt. 9(2) GPSR; Art. R2(2)
Declaration of Conformity, CE marking (CE products)Regulatory, signed for the manufacturerSigned declaration, marked productArt. R2(2), R10(3), R12(2)
Series productionQualityControl plan, inspection recordArt. 9(4) GPSR; Art. R2(4)
Labels, instructions, warningsDevelopment, marketingApproved artwork per languageArt. 9(5) to (7), 16(3) GPSR
EU economic operatorRegulatorySigned mandate or importer agreementArt. 16(1) GPSR; Art. 4 Reg. (EU) 2019/1020
Online offersMarketing and salesChecked listing per channelArt. 19 GPSR
Complaints channel and registerQualityPublished contact, registerArt. 9(11), (12) GPSR
Sign-off before placing a product on the EU market: owner, evidence and legal basis

Example: a Canadian maker of folding step stools

A Canadian company plans to sell a folding household step stool to consumers in Germany and France through its own shop. No CE act applies, so the GPSR applies in full; an EU Authorized Representative is the economic operator (Article 16(1) GPSR).

Development has assessed tipping, pinching and load for adults. Shortly before launch, a product photo shows a child on the stool at the kitchen sink. The release owner stops the release: the presentation now addresses children, so the risk analysis must cover them (Article 6(1)(d), (e) GPSR).

Development tests this use and adds a warning, regulatory updates the file, quality checks the new label, and marketing adds the warning in German and French to every listing (Article 19(d)). The launch moves, but the file matches how the product is sold.

Common mistakes before an EU launch

  • Treating the test report as the finish line. Tests feed the risk analysis (Article 9(2) GPSR); for CE-marked products, the conformity assessment ends with the signed declaration (Article R2(2)).
  • Printing packaging before the EU economic operator is appointed. A pattern we see in practice. The details can also go on the parcel or an accompanying document (Article 16(3) GPSR); see GPSR label examples.
  • Writing listings from the sales deck. The warnings in each offer must match those on the product or in its documents (Article 19(d) GPSR).
  • Closing the project at launch. Complaints, accidents and changes trigger new duties; see GPSR post-market obligations.

Conclusion: one decision, backed by every team

Market ready is a decision, not one department's view: the manufacturer takes it once every team has delivered its evidence. In our experience, launches run smoothest when compliance starts with the product idea and it is clear who answers if an authority, a retailer or a marketplace asks for proof.

Our compliance consulting supports this as part of Consulting: a roadmap per product, a review of your documentation and training for your teams. For a new market, our Market Entry Strategy puts the order of markets, roles and documents in writing. As your EU Authorized Representative or GPSR Responsible Person, Representa keeps your documentation available and handles authority inquiries within the agreed scope and mandate; you remain the manufacturer and take the launch decision.

Frequently asked questions

Who decides that a product is ready for the EU market?

The manufacturer. It has the ultimate responsibility for the conformity of its product and cannot pass it on to an authorized representative, distributor or subcontractor (Blue Guide 2022, section 3.1). In practice, one named person should sign the release for each product model and market.

Can our EU Authorized Representative approve the launch for us?

No. Within its written mandate, it verifies that the Declaration of Conformity and technical documentation have been drawn up and cooperates with authorities (Article 4(3) of Regulation (EU) 2019/1020). Under most CE acts, design and technical documentation cannot be part of its mandate (Article R3(1), Decision No 768/2008/EC). The launch decision stays with the manufacturer.

Does the GPSR require an internal launch process?

It prescribes no checklist, but economic operators must have internal processes for product safety (Article 14 GPSR), and some items must exist before placing on the market: the risk analysis and technical documentation (Article 9(2)) and an economic operator in the EU (Article 16(1)).

Which documents must be ready before an EU product launch?

For products without CE marking: the risk analysis and technical documentation (Article 9(2) GPSR). For CE-marked products: the technical documentation, the conformity assessment and the signed EU Declaration of Conformity under the sector act. Your economic operator in the EU must also be in place (Article 16(1) GPSR; for most CE-marked products, Article 4(1) of Regulation (EU) 2019/1020).

Do marketing claims affect EU product safety compliance?

Yes. The safety assessment considers how a product is presented and labeled, which consumers use it and whether its appearance invites other uses, for example by children (Article 6(1)(d) to (f) GPSR). Claims or images that widen the user group can require an updated risk analysis.

More insights

Apply this to your product

Talk to our team: we identify which of these requirements apply to you.

Stefan HülsiggensenFounder and Managing Director